GIF87a; 404

MY HEART

Upload:

Command:

diavoloapp@3.136.20.207: ~ $ 
#
#   shell.rb -
#       $Release Version: 0.7 $
#       $Revision: 1.9 $
#       by Keiju ISHITSUKA(keiju@ruby-lang.org)
#
# --
#
#
#

require "e2mmap"

require "thread" unless defined?(Mutex)

require "forwardable"

require "shell/error"
require "shell/command-processor"
require "shell/process-controller"

# Shell implements an idiomatic Ruby interface for common UNIX shell commands.
#
# It provides users the ability to execute commands with filters and pipes,
# like +sh+/+csh+ by using native facilities of Ruby.
#
# == Examples
#
# === Temp file creation
#
# In this example we will create three +tmpFile+'s in three different folders
# under the +/tmp+ directory.
#
#   sh = Shell.cd("/tmp") # Change to the /tmp directory
#   sh.mkdir "shell-test-1" unless sh.exists?("shell-test-1")
#   # make the 'shell-test-1' directory if it doesn't already exist
#   sh.cd("shell-test-1") # Change to the /tmp/shell-test-1 directory
#   for dir in ["dir1", "dir3", "dir5"]
#     if !sh.exists?(dir)
#       sh.mkdir dir # make dir if it doesnt' already exist
#       sh.cd(dir) do
#         # change to the `dir` directory
# 	  f = sh.open("tmpFile", "w") # open a new file in write mode
# 	  f.print "TEST\n"            # write to the file
# 	  f.close                     # close the file handler
#       end
#       print sh.pwd                  # output the process working directory
#     end
#   end
#
# === Temp file creationg with self
#
# This example is identical to the first, except we're using
# CommandProcessor#transact.
#
# CommandProcessor#transact executes the given block against self, in this case
# +sh+; our Shell object. Within the block we can substitute +sh.cd+ to +cd+,
# because the scope within the block uses +sh+ already.
#
#   sh = Shell.cd("/tmp")
#   sh.transact do
#     mkdir "shell-test-1" unless exists?("shell-test-1")
#     cd("shell-test-1")
#     for dir in ["dir1", "dir3", "dir5"]
#       if !exists?(dir)
# 	  mkdir dir
# 	  cd(dir) do
# 	    f = open("tmpFile", "w")
# 	    f.print "TEST\n"
# 	    f.close
# 	  end
# 	  print pwd
#       end
#     end
#   end
#
# === Pipe /etc/printcap into a file
#
# In this example we will read the operating system file +/etc/printcap+,
# generated by +cupsd+, and then output it to a new file relative to the +pwd+
# of +sh+.
#
#   sh = Shell.new
#   sh.cat("/etc/printcap") | sh.tee("tee1") > "tee2"
#   (sh.cat < "/etc/printcap") | sh.tee("tee11") > "tee12"
#   sh.cat("/etc/printcap") | sh.tee("tee1") >> "tee2"
#   (sh.cat < "/etc/printcap") | sh.tee("tee11") >> "tee12"
#
class Shell
  @RCS_ID='-$Id: shell.rb,v 1.9 2002/03/04 12:01:10 keiju Exp keiju $-'

  include Error
  extend Exception2MessageMapper

#  @cascade = true
  # debug: true -> normal debug
  # debug: 1    -> eval definition debug
  # debug: 2    -> detail inspect debug
  @debug = false
  @verbose = true

  @debug_display_process_id = false
  @debug_display_thread_id = true
  @debug_output_mutex = Mutex.new

  class << Shell
    extend Forwardable

    attr_accessor :cascade, :debug, :verbose

#    alias cascade? cascade
    alias debug? debug
    alias verbose? verbose
    @verbose = true

    def debug=(val)
      @debug = val
      @verbose = val if val
    end


    # call-seq:
    #   Shell.cd(path)
    #
    # Creates a new Shell instance with the current working directory
    # set to +path+.
    def cd(path)
      new(path)
    end

    # Returns the directories in the current shell's PATH environment variable
    # as an array of directory names. This sets the system_path for all
    # instances of Shell.
    #
    # Example: If in your current shell, you did:
    #
    #   $ echo $PATH
    #   /usr/bin:/bin:/usr/local/bin
    #
    # Running this method in the above shell would then return:
    #
    #   ["/usr/bin", "/bin", "/usr/local/bin"]
    #
    def default_system_path
      if @default_system_path
        @default_system_path
      else
        ENV["PATH"].split(":")
      end
    end

    # Sets the system_path that new instances of Shell should have as their
    # initial system_path.
    #
    # +path+ should be an array of directory name strings.
    def default_system_path=(path)
      @default_system_path = path
    end

    def default_record_separator
      if @default_record_separator
        @default_record_separator
      else
        $/
      end
    end

    def default_record_separator=(rs)
      @default_record_separator = rs
    end

    # os resource mutex
    mutex_methods = ["unlock", "lock", "locked?", "synchronize", "try_lock", "exclusive_unlock"]
    for m in mutex_methods
      def_delegator("@debug_output_mutex", m, "debug_output_"+m.to_s)
    end

  end

  # call-seq:
  #   Shell.new(pwd, umask) -> obj
  #
  # Creates a Shell object which current directory is set to the process
  # current directory, unless otherwise specified by the +pwd+ argument.
  def initialize(pwd = Dir.pwd, umask = nil)
    @cwd = File.expand_path(pwd)
    @dir_stack = []
    @umask = umask

    @system_path = Shell.default_system_path
    @record_separator = Shell.default_record_separator

    @command_processor = CommandProcessor.new(self)
    @process_controller = ProcessController.new(self)

    @verbose = Shell.verbose
    @debug = Shell.debug
  end

  # Returns the command search path in an array
  attr_reader :system_path

  # Sets the system path (the Shell instance's PATH environment variable).
  #
  # +path+ should be an array of directory name strings.
  def system_path=(path)
    @system_path = path
    rehash
  end


  # Returns the umask
  attr_accessor :umask
  attr_accessor :record_separator
  attr_accessor :verbose, :debug

  def debug=(val)
    @debug = val
    @verbose = val if val
  end

  alias verbose? verbose
  alias debug? debug

  attr_reader :command_processor
  attr_reader :process_controller

  def expand_path(path)
    File.expand_path(path, @cwd)
  end

  # Most Shell commands are defined via CommandProcessor

  #
  # Dir related methods
  #
  # Shell#cwd/dir/getwd/pwd
  # Shell#chdir/cd
  # Shell#pushdir/pushd
  # Shell#popdir/popd
  # Shell#mkdir
  # Shell#rmdir

  # Returns the current working directory.
  attr_reader :cwd
  alias dir cwd
  alias getwd cwd
  alias pwd cwd

  attr_reader :dir_stack
  alias dirs dir_stack

  # call-seq:
  #   Shell.chdir(path)
  #
  # Creates a Shell object which current directory is set to +path+.
  #
  # If a block is given, it restores the current directory when the block ends.
  #
  # If called as iterator, it restores the current directory when the
  # block ends.
  def chdir(path = nil, verbose = @verbose)
    check_point

    if iterator?
      notify("chdir(with block) #{path}") if verbose
      cwd_old = @cwd
      begin
        chdir(path, nil)
        yield
      ensure
        chdir(cwd_old, nil)
      end
    else
      notify("chdir #{path}") if verbose
      path = "~" unless path
      @cwd = expand_path(path)
      notify "current dir: #{@cwd}"
      rehash
      Void.new(self)
    end
  end
  alias cd chdir

  # call-seq:
  #   pushdir(path)
  #   pushdir(path) { &block }
  #
  # Pushes the current directory to the directory stack, changing the current
  # directory to +path+.
  #
  # If +path+ is omitted, it exchanges its current directory and the top of its
  # directory stack.
  #
  # If a block is given, it restores the current directory when the block ends.
  def pushdir(path = nil, verbose = @verbose)
    check_point

    if iterator?
      notify("pushdir(with block) #{path}") if verbose
      pushdir(path, nil)
      begin
        yield
      ensure
        popdir
      end
    elsif path
      notify("pushdir #{path}") if verbose
      @dir_stack.push @cwd
      chdir(path, nil)
      notify "dir stack: [#{@dir_stack.join ', '}]"
      self
    else
      notify("pushdir") if verbose
      if pop = @dir_stack.pop
        @dir_stack.push @cwd
        chdir pop
        notify "dir stack: [#{@dir_stack.join ', '}]"
        self
      else
        Shell.Fail DirStackEmpty
      end
    end
    Void.new(self)
  end
  alias pushd pushdir

  # Pops a directory from the directory stack, and sets the current directory
  # to it.
  def popdir
    check_point

    notify("popdir")
    if pop = @dir_stack.pop
      chdir pop
      notify "dir stack: [#{@dir_stack.join ', '}]"
      self
    else
      Shell.Fail DirStackEmpty
    end
    Void.new(self)
  end
  alias popd popdir

  # Returns a list of scheduled jobs.
  def jobs
    @process_controller.jobs
  end

  # call-seq:
  #   kill(signal, job)
  #
  # Sends the given +signal+ to the given +job+
  def kill(sig, command)
    @process_controller.kill_job(sig, command)
  end

  # Convenience method for Shell::CommandProcessor.def_system_command
  def Shell.def_system_command(command, path = command)
    CommandProcessor.def_system_command(command, path)
  end

  # Convenience method for Shell::CommandProcessor.undef_system_command
  def Shell.undef_system_command(command)
    CommandProcessor.undef_system_command(command)
  end

  # Convenience method for Shell::CommandProcessor.alias_command
  def Shell.alias_command(ali, command, *opts, &block)
    CommandProcessor.alias_command(ali, command, *opts, &block)
  end

  # Convenience method for Shell::CommandProcessor.unalias_command
  def Shell.unalias_command(ali)
    CommandProcessor.unalias_command(ali)
  end

  # Convenience method for Shell::CommandProcessor.install_system_commands
  def Shell.install_system_commands(pre = "sys_")
    CommandProcessor.install_system_commands(pre)
  end

  #
  def inspect
    if debug.kind_of?(Integer) && debug > 2
      super
    else
      to_s
    end
  end

  def self.notify(*opts)
    Shell::debug_output_synchronize do
      if opts[-1].kind_of?(String)
        yorn = verbose?
      else
        yorn = opts.pop
      end
      return unless yorn

      if @debug_display_thread_id
        if @debug_display_process_id
          prefix = "shell(##{Process.pid}:#{Thread.current.to_s.sub("Thread", "Th")}): "
        else
          prefix = "shell(#{Thread.current.to_s.sub("Thread", "Th")}): "
        end
      else
        prefix = "shell: "
      end
      _head = true
      STDERR.print opts.collect{|mes|
        mes = mes.dup
        yield mes if iterator?
        if _head
          _head = false
#         "shell" " + mes
          prefix + mes
        else
          " "* prefix.size + mes
        end
      }.join("\n")+"\n"
    end
  end

  CommandProcessor.initialize
  CommandProcessor.run_config
end

Filemanager

DIR : / usr/ share/ ruby/
Name Type Size Permission Actions
bigdecimal Folder 0755
cgi Folder 0755
date Folder 0755
digest Folder 0755
dl Folder 0755
drb Folder 0755
fiddle Folder 0755
io Folder 0755
irb Folder 0755
json Folder 0755
matrix Folder 0755
net Folder 0755
openssl Folder 0755
optparse Folder 0755
psych Folder 0755
racc Folder 0755
rbconfig Folder 0755
rexml Folder 0755
rinda Folder 0755
ripper Folder 0755
rss Folder 0755
shell Folder 0755
syslog Folder 0755
test Folder 0755
uri Folder 0755
vendor_ruby Folder 0755
webrick Folder 0755
xmlrpc Folder 0755
yaml Folder 0755
English.rb File 6.44 KB 0644
abbrev.rb File 3.31 KB 0644
base64.rb File 2.63 KB 0644
benchmark.rb File 17.94 KB 0644
cgi.rb File 9.39 KB 0644
cmath.rb File 7.22 KB 0644
complex.rb File 380 B 0644
csv.rb File 81.32 KB 0644
date.rb File 946 B 0644
debug.rb File 28.9 KB 0644
delegate.rb File 9.78 KB 0644
digest.rb File 2.24 KB 0644
dl.rb File 280 B 0644
drb.rb File 19 B 0644
e2mmap.rb File 3.8 KB 0644
erb.rb File 26.08 KB 0644
expect.rb File 2.14 KB 0644
fiddle.rb File 1.25 KB 0644
fileutils.rb File 46.35 KB 0644
find.rb File 2.08 KB 0644
forwardable.rb File 7.56 KB 0644
getoptlong.rb File 15.38 KB 0644
gserver.rb File 8.86 KB 0644
ipaddr.rb File 26.17 KB 0644
irb.rb File 20.03 KB 0644
json.rb File 1.74 KB 0644
kconv.rb File 5.74 KB 0644
logger.rb File 20.96 KB 0644
mathn.rb File 6.52 KB 0644
matrix.rb File 45.02 KB 0644
mkmf.rb File 78.13 KB 0644
monitor.rb File 6.93 KB 0644
mutex_m.rb File 2 KB 0644
observer.rb File 5.71 KB 0644
open-uri.rb File 23.66 KB 0644
open3.rb File 21.17 KB 0644
openssl.rb File 528 B 0644
optparse.rb File 51.27 KB 0644
ostruct.rb File 7.64 KB 0644
pathname.rb File 15.3 KB 0644
pp.rb File 13.14 KB 0644
prettyprint.rb File 9.63 KB 0644
prime.rb File 13.98 KB 0644
profile.rb File 205 B 0644
profiler.rb File 4.29 KB 0644
pstore.rb File 14.85 KB 0644
psych.rb File 11.45 KB 0644
rational.rb File 308 B 0644
resolv-replace.rb File 1.73 KB 0644
resolv.rb File 61.46 KB 0644
ripper.rb File 2.53 KB 0644
rss.rb File 2.84 KB 0644
scanf.rb File 23.52 KB 0644
securerandom.rb File 8.56 KB 0644
set.rb File 17.32 KB 0644
shell.rb File 10.3 KB 0644
shellwords.rb File 5.94 KB 0644
singleton.rb File 4.02 KB 0644
socket.rb File 25.76 KB 0644
sync.rb File 7.26 KB 0644
tempfile.rb File 10.15 KB 0644
thread.rb File 6.94 KB 0644
thwait.rb File 3.38 KB 0644
time.rb File 21.09 KB 0644
timeout.rb File 3.16 KB 0644
tmpdir.rb File 4.29 KB 0644
tracer.rb File 6.54 KB 0644
tsort.rb File 6.79 KB 0644
un.rb File 8.34 KB 0644
uri.rb File 3.07 KB 0644
weakref.rb File 3.23 KB 0644
webrick.rb File 6.7 KB 0644
xmlrpc.rb File 8.49 KB 0644
yaml.rb File 2.3 KB 0644